| Model |
NP200 |
| Appearance |
|
| W × H × D (mm) |
96 × 96 × 100 |
| Power voltage |
100 – 240 V a.c (50/60 ㎐), voltage fluctuation rate ± 10 % |
| Power consumption |
Max. 6.0 W / Max. 10 VA |
| Input |
| T.C : K,J,E,T,R,B,S,L,N,U,W,PLII |
| R.T.D : Pt100(KS/IEC), KPt100(KS) |
| DC Voltage input : 1 – 5 V, -10 – 20 mV, 0 – 100 mV, |
| DC Current input : 4 – 20 mA(attach 250 Ω external resistor) |
|
| Control output |
Relay output, voltage output (SSR), current output (SCR) |
| Control operation |
PID control, ON/OFF control |
| Alarm type |
High/Low, High/Low deviation |
| Communication method |
RS 485/422, 2-wire half-duplex or 4-wire hlaf-duplex |
| Setting |
By front Shift up, Down keys |
| Display |
PV : Digital LED , SV : Graphic LCD |
| Accuracy |
0.1 % of Full Scale |
| Setting accuracy |
1 or 0.1% (According to input range) |
| External control |
4 alarm output (Run, Reset, Step, Hold) |
| Number of pattern contact |
30 patterns, Up to 99 segments per pattern can be set |
| Segment |
300 segment |
| Set time unit of program |
Hours, Minutes, seconds |
| Sampling cycle |
100 ms |
| Insulation resistance |
Min. 500 V a.c 20 ㏁ |
| Dielectric strength |
2300 V a.c 50/60 ㎐ for 1 min
(between 1st and 2nd terminals and between 1st terminal and ground) |
| Ambient temperature & humidity |
0 ~ 50 ℃, 35 ~ 85 % R.H. (without condensation) |
| Weight |
Approx. 696 g |
-%2030%20patterns,%20300%20segments%20(1%20pattern%20/%2099%20segments)-%20Heat%20&%20cooling%20PID%20control-%203%20level%20PID%20selection%20(4%20PID%20groups)-%20PID%20auto-tuning%20mode%202%20types-%20Digital%20input(DI)%207%20contacts,%20User%20output(UO)%2010%20contacts-%20Communication%20fuction%20(RS485/422)&media=https://www.stcontrol.co.th/wp-content/uploads/2020/06/Temperature-controller-Programmable-NP200.jpg){kind=link}