รายละเอียดเพิ่มเติม
[vc_row][vc_column width=”3/4″][vc_column_text]
· Suffix code
Model
Code
Description
TH510 –
Programmable temperature/Humidity controller
Display
1
Display(5.7″ TFT LCD)
N
None
Input/output
1
8 input points/6 output points(1 module)+Power module+Control module
2
8 input points/14 output points(2 modules)+Power module+Control module
3
16 input points/16 output points(3 modules)+Power module+Control module
N
No input/output
Language
S
Korean, English, and Chinese(Simplified)
T
Korean, English, and Chinese(Traditional)
※ This product consists of the display and control(power, control, input, and output modules)
(Up to 32 contact input/output points, respectively)
Product
Model
Description
Display
TH510-1N
Display(5.7″ TFT LCD)
Control module
TH510-MAIN
Temperature•Humidity control module
Power module
TM-PWR
Power module
Input module
TM-DI
Module with 16 input points
Output module
TM-DO
Module with 8 output points
Input/output module
TM-DIO
Module with 8 input and 6 output points
· Specification
Input type
2 types of thermoresistor (Pt-100, KPt-100), 2 types of DC voltage (1 – 5 V, 0 – 30 V)
Sampling cycle
250 ㎳
Measured current of thermoresistor(RTD)
Approx. 0.21 mA
Input resistance
Input resistance
Allowable wire resistance
RTD : Max. 10Ω/wire, DC voltage : 2 ㏀ or less
Influence of wire resistance
RTD±0.3 ℃/10 Ω (3 wires must have the same wire resistance)
Allowable input voltage
DC voltage : ±33 V DC or less
Detection of sensor disconnection(Burn-out)
UP-Scale for disconnection
Marking accuracy
Temperature(℃) : ±0.1% ±1 digit of Full Scale, humidity : ±1% ±1 digit of Full Scale
Insulation resistance
20 ㏁ or 500 V DC between power and FG terminals
internal pressure
Between 1st and 2nd terminals : Min. 1500 V AC for 1 min
Between 1st and FG terminals : Min. 1500 V AC for 1 min
Between 2nd and FG terminals : Min. 1500 V AC for 1 min
( 1st terminals : Power terminal (except FG terminal) and relay output terminal
2nd terminals : Sensor input terminal, contact input terminal, communication terminal)
Power voltage
100 – 240 V a.c.
Voltage fluctuation rate
± 10% of supply voltage
Power Consumption
25 VA (Based on TH510-13)
Ambient temperature
0 ~ 50 ℃
Ambient humidity
20 ~ 90 % RH (However, no condensation)
Ambient temperature
-25℃ ~ 70℃
Internal vibration
10 – 55 Hz, Amplitude 0.75 mm, 4 directions in 3 directions, 5 minutes / cycle
Internal shock
147 m/s², 3 times in 3 directions
Dimensions
Display : 145(W) X 145(H) X 42.3(D), Power module : 50(W) X 107(H) X 112(D)
Control module : 40(W) X 107(H) X 112(D)
Weight
1.79 Kg (Based on TH510-13)
Input
Input calibration(Sensor bias)
1 Temperature contact : EUS(0~100 %)
1 Humidity contact : EUS(0 ~ 100 %)
Dry/wet-bulb sensor compensation
Compensate the dry/wet sensor difference after removing the gauze of the wet-bulb sensor.
Scaling
DC voltage(VDC) : Input scaling according to conversion range
Input filter(LPF)
0 ~ 120 sec
Control mode
Operation type
Constant-value / Program control
Control output
Temperature control output
SSR output or SCR (4 – 20 mA DC) output
Humidity control output
Control operation
Pattern
100 patterns(1 pattern/100 segments)
Segment
2000 segments
Group
16 groups(temperature 4 zones X humidity 4 zones)
Auto tuning
16 groups(temperature 4 zones X humidity 4 zones)
Proportional band
0.00 ~ 100.00 % (For 0.00 %, ON/OFF control)
Integral time
0.0 ~ 3,000 sec (OFF when 0 sec)
Derivative time
ON/OFF control
Set 0.0 to proportional band(PB)
Normal Open/Normal Close
According to selection of Normal Open/Normal Close for control output
Hysteresis
EUS (0 ~ 100 %)
Transmission output
Temperature, Humidity
Current output(4 – 20 ㎃ d.c.)
Select between indication value (PV), set value (SV), and output amount (MV)
Scaling
Auto scaling for defined upper/lower limit range (4 – 20 mA DC)
Alarm setting
Alarm setting
System alarm : 8 points
Assign 4 of 8 pattern alarms to a pattern
Alarm type
Absolute high/low limit, deviation high/low limit, in range/out of range (alarm direction, hold)
Absolute alarm setting range
EU (0 ~ 100 %)
Offset information setting range
EUS (-100 ~ 100 %)
Hysteresis
EUS (0 ~ 100 %)
Memory specifications
Internal memory
Nonvolatile flash memory (80 MB)
External memory
SD card(2 GB) : Saving of 1 year at 1 S interval
Saving interval
1 ~ 360
Memory information
Program information, setting value, recovery, and temperature setting/specific/output value
Display
TFT color LCD (115.2 × 86.4 mm)
Number of Pixels
640 X 480 Pixel
Back light
LED Back light
Life cycle of back light
Approx. 40,000 h
Touch type
Resistive type (4 Wires)
Language
Korean/English/Chinese(Simplified)
Contact output(DO)
Up to 32 relay
A Contact
30 V d.c. 3 A max, 250 V a.c. 3 A
B Contact
NO : 30 V d.c. 5 A max. 250 V a.c. 5 A
NC : 30 V d.c. 1 A max. 250 V a.c. 5 A
Control output
SSR output
ON : 18 V DC Pulse voltage(800 Ω or more load resistance)
SCR output
4 – 20 mA DC (600 Ω or less load resistance)
Transmission output
Current output
4 – 20 ㎃ d.c
Load resistance
600 Ω or less load resistance
Output limit
-5.00 ~ 105.00 %
Output type
Specific value(PV), Setting value(SV), Output(MV), and random
Refresh interval
250 ㎳
Input score
Up to 32 points
Input signal
Non-voltage contact input
Operating condition
Running / Always
[Communication specifications]
Applied standard
RS485
Max. connection number
1:32 (address 1 ~ 99)
Communication type
2-wire
Synchronization
Asynchronous
Communication distance
Approx. 1.2 km or less
Communication speed
9600, 19200, 38400, 57600, 115200 bps
Data Length
7/8 Bits
Parity Bit
NONE / EVEN / ODD
Stop Bit
1 / 2 Bit(s)
Protocol
PC-Link / PC-link + SUM / MODBUS ASC / MODBUS RTU
Response Time
0 ~ 100 ㎳
[Range configuration by input type ]
Input type
Temperature
Humidity
Measuring range (℃)
accuracy
Measuring range
(%RH)
accuracy
Thermoresistor (RTD)
Pt100 Ω
Pt-1
-100.0 ~ 300.0
±0.1 % of FS
±1 Digit
0.0 ~ 100.0
±1 % of FS
±1 Digit
Pt-2
-100.00 ~ 150.00
KPt100 Ω
KPt-1
-100.0 ~ 300.0
KPt-2
-100.00 ~ 150.00
DC voltage (VDC)
1 – 5 V
-100.0 ~ 300.0
±0.1 % of FS
±1 Digit
0 – 30 V
-100.0 ~ 300.0
[/vc_column_text][/vc_column][vc_column width=”1/4″][vc_btn title=”HANYOUNGNUX Catalog” color=”primary” align=”left” i_icon_fontawesome=”fas fa-download” button_block=”true” add_icon=”true” link=”url:https%3A%2F%2Fwww.stcontrol.co.th%2Fdownloads%2FRobot%2FST_HANYOUNGNUX_GUIDE2020.pdf|||” ovic_vc_custom_id=”ovic_vc_custom_5ef0329fa3ecb”][/vc_column][/vc_row]